DISC Fostex NX-6A Active Studio Monitors (Pair) Yleiskatsaus
Tuotekuvaus käännetty englannin kielestä - Näe alkuperäinen versio tästä
Fostex NX-6A Nearfield monitorit - luonnollinen äänen, avoimesti ja harshness ilman edes korkea äänenpaineen tasolla - ja mukaan lukien näiden hienovarainen alhaista taajuutta.
Hinta paria kohden.
Tuotteen viite: 8571
Tuotetiedot
Tarkastakaa täydet tuotetiedot6.5" High Resolution Nearfield Studio Monitor
Dedicated 60W (LF) + 40W (HF) bi-amplifier
Extended 55Hz - 38kHz frequency response
Magnetically shielded drivers
Time-aligned front baffle design and internal HP Sound reflectors
Main Features
Low Frequency Unit
6.5" (160mm) with HR (Hyper Radial) diaphragm which utilises the latest diaphragm �Radial Papermaking Technology` for natural and smooth sound reproduction
UDR (Up/Down Roll) Tangential driver edge eliminates the unwanted resonance
Wide-range 20mm hard dome tweeter
Employs magnesium diaphragm which eliminates metallic characteristics and features ultra-fast high frequency response
LF and HF units feature highly rigid cast aluminum frames minimizing unnecessary vibrations and resonances
Magnetically shielded drivers allow for safe placement close to a video monitor
Time-aligned front baffle enclosure design with the recessed HF driver for a sharply focused sound image
Unique HP sound reflectors prevents the generation of standing waves in the enclosure
Bi-amplifier
Dedicated 60W (LF) + 40W (HF) bi-amplifier eliminates electric interference between the drivers
Overall output level control
Dedicated tweeter level control (±3dB) cut/boost
LO EQ control : ±3d cut/boost around 55Hz for optimum performance in varying environments
SPEAKER SECTION
Impedance 6 ohm (LF) / 8 ohm (HF)
Speaker Units
LF unit 160mm HR diaphragm woofer
HF unit 20mm Magnesium Dome tweeter
Frequency response 55Hz - 38kHz
Maximum Sound Pressure Level 104dB/W (Max/rated input)
Enclosure Type Bass reflex type with HP sound reflectors
AMPLIFIER SECTION
Output
LF 60W (typical)
HF 60W (typical)
Input - Balanced
Connector XLR-3-31 type (Pin 2:HOT) x 1
Impedance > 10k ohm
Level +4dBu
Input - Unbalanced
Connector ?m phone jack x 1
Impedance > 10k ohm
Level -10dBV
Crossover Frequencies 6kHz / -18dB / Oct (LF) & 8kHz / -18dB / Oct(HF)
Tweeter Level Control ±3dB variable
Lo EQ control 55Hz, ±3dB variable
PHYSICAL
Dimensions 230(W) x 350(H) x 334(D)mm
Weight Approx. 13kg
Power Requirements 120V, 60Hz. 230V, 50/60Hz. 230V, 50Hz
Power Consumption 70W