Sonarworks Calibrated Measurement Microphone
Key Features
- Hear how your speakers really sound with a precise condenser element
- Analyse every detail across a wide frequency response (20Hz - 20kHz)
- Minimal sound field disruption thanks to a slim design
- Comes measurement-ready with calibration files and a FREE trial for SoundID
Sonarworks Calibrated Measurement Microphone Overview
The Sonarworks Calibrated Measurement Microphone lets you hear your speakers with unparalleled precision. Get an accurate acoustic image from a pre-polarised electret-condenser capsule, and treat your room with ease. From mixing to mastering, you'll hear every single detail.
No colouration. No inaccuracies. The Sonarworks Measurement Microphone delivers superior audio capture across a flat, extended frequency response. Its unobtrusive housing design prevents disturbances in your sound field, so you won't get a spike in the measured pressure level.
Ready to go - as soon as you open the box. The measurement mic has been tested by Sonarworks acousticians to eliminate sample-to-sample irregularities. Files for 0-degrees and 30-degrees calibration are included. What's more, you'll have access to SoundID Reference for Speakers & Headphones with a complimentary 21-day free trial.
Product Ref: 176501
Full Description
View Full DescriptionWhat’s in the box
- SoundID reference measurement microphone
- Microphone calibration file for 30-degree off-axis measurements in Sonarworks software native format (.swmic)
- Microphone calibration file for 0-degrees on-axis measurements in .txt format
- 21-day trail of SoundID Reference available online
Features
- Perfect accuracy from a pre-polarised condenser capsule
- Flawless operation with freedom from sample-to-sample irregularities
- Uniform audio capture with an omnidirectional polar pattern
- Picks up every detail across a wide frequency range (20Hz – 20kHz)
- Fine-tune your microphone with included calibration profiles
- Precisely tested by Sonarworks acousticians against an ANSI certified measurement microphone
- Get to work straight out of the box with a 21-day trial for SoundID Reference for Speakers & Headphones
System requirements
- Mac: macOS 10.12 or later
- PC: Windows 8 (64-bit) or later
- Sonarworks supported or Sonarworks individually calibrated headphones
- 2.0 or 2.1 stereo speaker system
- An audio interface featuring +48V Phantom Power and 44.1 kHz sample rate capability
- With SoundID Reference during the speaker measurement process, the audio hardware setup must consist only of a single external hardware device
- XLR to XLR audio cable
Specifications
- Capsule type: Pre-polarised electret-condenser
- Frequency response: 20Hz – 20kHz
- Polar pattern: Omnidirectional
- Sensitivity: -37dB/Pa (14mV)
- Self noise: 24dB
- S/N ratio: 70dB
- Dynamic range: 106dB
- Maximum SPL: 132dB
- Product code: SW-XREF20R5
| Reviews of our service by customers who bought this item
View all