Acon Restoration Suite 2

Full Description

DeNoise

A multifunctional tool, DeNoise can clean and restore audio that has been tampered by extraneous noises from hiss, wind or even electrical buzzing. With automatic noise removal and adaptive modes, DeNoise measures the noise characteristics before creating a counteractive profile. The dynamic profiles of DeNoise ensure that you can minimise the effect of extraneous noise that fluctuates over time with different fundamental frequencies. Supporting mid/side processing, DeNoise allows you to effectively reduce noise from left and right channels whilst maintaining the central mono information.

DeHum

Wherever poorly grounded instruments or equipment is used, a mains hum will always be present in the audio. DeHum uses an advanced algorithm that includes an automatic function to find the hum in your audio before removing it discretely without affecting the tone of your original audio. Supporting immersive formats up to 7.1.6 with Mid/Side processing, there's no audio file that can't be restored with DeHum.

DeClick

Remove impulse noises such as clicks, thumps, crackles and clicks from your signal without detracting from the quality of the original audio. Ideal for use on single tracks from vocals to piano or for full vintage vinyl recordings and modern digital recordings, DeClick is ideal for restoring your audio and removing unwanted plosives or corrupted digital data packets. Designed with accurate transient detection, DeClick can maintain the envelope of your audio even under extreme settings. Now supporting Mid/Side processing to effectively reduce unwanted fluctuations across the stereo image without affecting your mono audio information.

DeClip

A common problem when archiving vintage recordings, DeClip restores your audio by removing analog or digital clipping artefacts. By using two threshold levels, upper and lower, DeClip allows you to target specific ranges with independent controls over each to ensure that you are only removing the clipping peaks whilst ensuring the rest of your original audio remains untouched. Packed in a streamlined interface, DeClip makes it simple to remove harsh clipping and distortion with a graphical representation of levels of both upper and lower levels.

Features

Acon Digital DeNoise 2

• Accurate and advanced stationary noise removal without impacting the original material
• Noise analysis creates profiles for adaptive reduction which change rapidly over time
• Responsive transient detection ensures your transient envelopes aren't reduced
• Effective temporal smoothing reduces “musical noise” artefacts
• Optional M/S processing
• Frequency-specific noise reduction or broadband noise reduction
• Input and output frequency response plotted on the streamlined graphical interface
• Enhance or subdue certain frequencies with frequency emphasis control
• High and low shelving filters with variable slopes (-3 to -96 dB / octave)
• High and low peak filters with adjustable bandwidth (0.1 to 3.0 octaves)
• Listen to the removed noise using Solo Noise function

Acon Digital DeHum 2

• Eliminate hum and buzz without altering the original signal
• Innovative sinusoidal re-synthesis algorithm preserves original signal using notch filters
• Remove hum signals with fluctuating fundamental frequency using Adaptive Mode
• Scan for fundamental frequencies and lock to them using the new Automatic Fine-Tune mode
• Remove up to 96 harmonics with mid/side processing capabilities
• Target specifically odd harmonics
• High-resolution spectrum analysis shows estimated fundamental frequency and harmonics
• Listen to the removed signal in solo for more accurate monitoring

Acon Digital DeClick 2

• Removes unwanted clicks, crackles, thumps and plosives
• Accurate detection and removal ensure your source material goes untouched
• Intelligent algorithm can work to high levels without introducing unwanted artefacts
• CPU-efficient design makes it ideal for multiple instances across many tracks
• Mid/Side processing enables you to remove unwanted artefacts from stereo files while maintaining mono information
• Listen to the removed signal for more accurate monitoring using Residual mode
• Visual curve meters show the clicks and crackle removal rates

Acon Digital DeClip 2

• Effectively reduces digital clips and peaks
• Independent control over the lower and upper levels
• Automatic detect functionality scans for peaks and clipping
• Low upper and lower thresholds when dealing with symmetrical clipping
• Easily set thresholds and levels by the graphic representation of input and output history

Specifications

• System requirements:
• Operating system:
  • Windows: 10, 8x or 7
  • Mac: macOS / OS X 10.9 or later
• Processor:
  • Windows: Intel Core i3 or AMD multi-core processor (Intel Core i5 or faster recommended)
  • Mac: Runs natively on ARM64 and Intel
• Host application:
  • Windows: A host application that is compatible with (32 bit or 64 bit) VST , VST3 or AAX (Pro Tools 10.3.5 or higher)
  • Mac: A host application that is compatible with (64 bit) AU, VST, VST3 or AAX (Pro Tools 11 or higher)
• RAM: 1 GB RAM (4 GB or more recommended)
• HDD space: 1 GB free HD space