Shure Beta 57A Dynamic Microphone - Nearly New

Full Description

Sonic versatility

More than just an instrument microphone. The Shure Beta 57A lets you capture a huge variety of sound sources with legendary Shure sound quality. The 57A boasts a frequency response that has been tailored to become a perfect match for drums, guitars, vocals, and horns, be it on stage or in the studio. A uniform supercardioid polar pattern allows you to capture your sound source with outstanding isolation. Off-axis sound is rejected effectively, whilst tone colouration from off-axis sounds that are picked up is kept to an absolute minimum. The polar pattern also allows you to take advantage of high gain before feedback, giving you the ability to make yourself heard without having to worry about issues from stage monitors or FoH speakers. Plus, with a Neodymium magnet that provides much greater sensitivity and an overall higher output, you can take advantage of a hotter signal to really cut through the mix.

Noise-free performance

Handling noise can be a real nuisance. The Beta 57A takes away that worry. Equipped with an advanced pneumatic shock mount system, the transfer of mechanical noise and vibrations is dramatically reduced. This includes handling noise, as well as noise and vibrations from the stage or accidental knocks when mounted to a mic stand.

Legendary Shure construction

When it's made by Shure, you know it's going to last. The Beta 57A Dynamic Microphone is no exception. The microphone's handle is crafted from robust die-cast metal with an enamel-coated finish. At the top, a dent-resistant steel mesh grille keeps your capsule safe from harm. Combined with high-quality components and decades of microphone building expertise, you can be sure that your Beta 57A will provide you with years of reliable operation.

Beta 57A vs SM57 - What's the difference?

When trying to decide what mic to go for, you'll always find conflicting opinions on which is the 'best' choice. To put it simply, the 'best' microphone to go for is the one that meets your needs. Knowing the differences between two popular microphones can dramatically help the decision-making process. The SM57 and the Beta 57A are two mics that are always closely compared due to their similarities in microphone genetics. So, what are the differences?

Firstly, there's the cosmetic differences. The SM57 utilises a smaller grill that lets you place the microphone closer to your sound source. This enables you to take advantage of the proximity effect to give your sound more power and low-end impact. The Beta 57A instead features a full protective grille, adding to the already legendary durability of the mic, with a flat top that still allows you to make use of the proximity effect in your recordings.

Both microphones also feature different polar patterns. The SM57 uses a cardioid pattern, whilst the Beta 57A is supercardioid. There are plenty of factors to consider when deciding on the best polar pattern for your needs, but cardioid provides much better rear rejection, whilst supercardioid boasts superior side rejection. The Beta 57A also uses a Neodymium magnet in its capsule, increasing the microphone's sensitivity and output level, resulting in a much better signal-to-noise ratio. Plus, the Beta 57A also has an advanced shock mount system (the SM57 also uses Shure's revered shock mount system, but the Beta's is a more advanced design), further reducing mechanical noise and vibration transmission.

Finally, there's the overall sound. Both microphones have developed a reputation for delivering outstanding sonic results across a huge variety of sound sources. But their frequency responses differ slightly. The Beta 57A's frequency response has been tailored to perfectly suit drums, guitars, vocals, and horns, with a slightly brighter high-end and a bit more of a low-end response. The SM57 is the go-to-choice for a huge percentage of recordings, but the Beta 57A is perfect for when you want that little bit extra from your treble and bass frequencies.

In the Box

• Shure Beta 57A Dynamic Microphone
• Stand Adapter
• 5/8'' to 3/8'' Thread Adapter
• Storage Bag

Features

• Precision-engineered dynamic microphone for live sound reinforcement and studio recording
• Premium mic with Shure's legendary durability, quality, and reliability
• Tight supercardioid polar pattern provides high gain-before-feedback and maximum isolation
• Superior rejection of off-axis sound with minimal off-axis tone colouration
• Tailored frequency response specifically shaped for guitars, drums, and vocals
• Capsule equipped with a Neodymium magnet for greater sensitivity and higher output
• Advanced pneumatic shock mount system minimises mechanical noise and vibration transfer
• Dent-resistant steel mesh grille and enamel-coated die-cast metal handle for excellent durability

Specifications

• Transducer Type: Dynamic (moving coil)
• Polar Pattern: Supercardioid
• Frequency Response: 50Hz - 16kHz, tailored
• Sensitivity: -51.00dBV/Pa - 2.80mV/Pa
• Output Impedance: 150 Ohms
• Connector: 3-pin XLR
• Dimensions: 160mm x 38mm x 38mm (H x W x D)
• Weight: 275g / 0.6lbs