Key Features
- 863MHz - 865MHz Wireless Operating Frequency
- Wireless freedom so you can perform without being tied to one place
- True diversity operation ensures maximum signal integrity at all times
- High-visibility LCD display lets you see all critical information at a glance
- Balanced XLR and unbalanced TS outputs for hooking up to amps and more
Alto Radius 200M True Diversity Instrument Wireless System Overview
You were born to be free. So get rid of that long, tone-sucking jack lead, and make the stage your own with the Alto Radius 200M True Diversity Instrument Wireless System.
This easy-to-use system lets you perform exactly the way you want to. The system's intuitive design makes frequency allocation and synchronisation simple, so you can get setup and performing as quickly as possible. Plus, with the receiver's true diversity design, the system switches between the removable BNC antennas automatically, giving you a clean, clear signal that's free from interruptions.
The Radius 200 receiver also features XLR and 1/4'' outputs, so you can send you signal to a wide variety of devices. Plus, with its easy-to-read back-lit LCD, you can see all the information about your system and status at a glance. And with a rugged metal receiver construction, this is a system that was built to withstand the demanding nature of life on stage.
Product Ref: 64346
Full Description
View Full DescriptionRemove the shackles
It's time to perform with freedom. The Alto Radius 200 system replaces the cables that have kept you tied down for so long. This all-in-one system boasts an easy-to-use design that lets you make use of the entire stage. No need to stand in one place anymore.
Each component within the system is easy to operate. A single button press can scan for the best frequency for the system to use, whilst an intuitive Sync function makes sure that your transmitter and receiver are synchronized with minimal effort. There's also a handy squelch control, so you can make sure that your sound is as clear as it can be.
Once your components are all synchronized, getting going is simple. Simply plug the included instrument cable into your guitar or bass, plug the other end into the bodypack transmitter, and you're good to go. You can clip the transmitter to your clothes so that it's out of the way. This will transmit your microphone signal to the Radius 200 receiver, which features outputs that you can send to a variety of different devices, including your amp, a PA system, and more.
The receiver is fitted with a front-panel rotary control so you can adjust the volume of your signal. Plus, with the receiver's easy-to-read LCD display, you can view all critical info and functions at a glance.
Step it up
Radius 200 systems take your wireless journey even further. If you're looking for a system that can withstand the rigours of the road and the harsh realities of life on the stage, you've found it. The Radius 200 Receiver has been built to last, boasting a rugged steel enclosure for maximum durability. You can easily mount it in a rack case using the included rackmount brackets.
If that wasn't enough, you gain the added benefit of removable BNC antennas with a Radius 200 system. This not only makes packing and transporting your system safer and easier, but it also lets you re-route your antennas using extension cables to maximise your signal. The receiver also gives your system true diversity operation, seamlessly switching between each antenna automatically to ensure that your signal is always at its strongest.
In the box
- Radius 200 Receiver
- Radius BPT Wireless Belt-Pack Transmitter
- 1/4'' Instrument Adapter Cable
- 1/4'' Unbalanced Audio Cable, 1m
- 2 x BNC Antennas
- Rackmount and Coupling Brackets (Screws Included)
- Power Adapter
- 2 x AA Batteries
Features
- All-in-one, easy-to-use instrument wireless system for the most demanding professional applications
- Dual-antenna/dual-receiver true diversity design for high-performance dropout-free operation
- Receiver boasts a high-visibility backlit LCD - shows RF frequency and channel, AF and RF signal levels, and more
- Wireless belt-pack transmitter complete with a 1/4'' instrument cable
- Single-button scan feature for quickly identifying the optimal operating frequency
- Squelch control for maximum clarity and dynamic range
- Front-panel rotary volume control
- Balanced XLR and unbalanced 1/4'' mic or line-level outputs
Specifications
Radius BPT Wireless Belt-Pack Transmitter
- UHF Band Operation: 863MHz - 865MHz
- Channel Selection: Synchronisation with receiver
- RF Power Output: 10mW (Max)
- Oscillator: PLL synthesised
- Frequency Stability: +/-0.005-percent
- Deviation: +/-20kHz with limiting compressor
- Spurious Emission: Grater than 60dB below carrier frequency
- THD: Less than 1-percent (at 1kHz)
- Tone Signal: 32.768kHz
- Display: 2-digit, 7-segment LCD
- Power: 3 VDC (1.5V via 2 x AA batteries)
- Dimensions: 9.7cm x 6.5cm x 2.4cm / 3.8'' x 2.6'' x 0.9'' (H x W x D)
- Weight: 0.1kg
Radius 200 Receiver
- UHF Band Operation: 863MHz - 865MHz
- Oscillator: PLL synthesised
- Frequency Stability: +/-0.005-percent
- Modulation: FM
- Transmission Range: 328ft / 100-metres
- S/N Ratio: Greater than 100dB
- Image and Spurious Rejection: 80dB
- Receiving Sensitivity: At 2uV over 52dB/A SNR
- Selectivity: Greater than 50dB
- AF Response: 80Hz - 18kHz
- Dynamic Range: Greater than 100dB
- Tone Signal: 32.768kHz
- Audio Output: 1 x XLR (balanced), 1 x 1/4" TRS (unbalanced)
- Display: High visibility backlit LCD with RF and AF meters
- Power Supply: 12V power supply (included)
- Power Consumption: 520mA
- Housing: Half 19'' EIA-rack metal case
- Dimensions: 4.2cm x 20cm x 18.3cm / 1.7'' x 7.9'' x 7.2'' (H x W x D)
- Weight: 1kg
| Reviews of our service by customers who bought this item
View all