Soundcraft EPM6 Analog Mixer - Secondhand

Full Description

Great Sound Quality

If you run a small venue, perform in a band, or need to amplify your voice in a lecture hall then the Soundcraft EPM6 6-channel Mixer is an excellent tool. It's got six channels for mixing which gives it a lot options for mixing sound in your venue. The GB30 microphone amplifiers feature high resolution audio with +22dB of headroom, meaning you can really increase the volume without the risk of losing audio quality. Condenser microphones are usable too, the Soundcraft EPM6 features true 48v phantom power across the board. You won't find better audio quality at this level and you won't be let down by the rich and transparent sound possible with the EPM6.

Incredible Build

The rack mountable, robust housing is an integral part of the EPM6. It's tough, so it'll be hard to damage regardless of whether you're touring with it or if it lies stationary on your audio rack. The quality build means it is sturdy and ready for anything you throw at it. The LED strips are bright and the 60mm high quality faders are just as strong as the rest of the build, so you won't risk them falling out during performances or when moving the desk from location to location.

Features

• 2 configurable auxiliary buses
• XLR-type and metal jack connector sockets
• RCA phono stereo playback inputs and record outputs
• 3-band EQ with a swept mid on mono inputs
• 2-band EQ on stereo inputs
• TRS insert sockets and inserts on all mono inputs and mix output
• Ten-segment LED output metering
• Intuitive and comprehensive solo system
• Headphone output
• Easily rack mountable
• Many applications including live music, recording, houses of worship and multi-speaker installations

Specifications

• Frequency Response Mic/Line input to any output: 20Hz to 20kHz +/-0.5dB
• THD & Noise: 96dB - typically @1kHz Fader cut-off (rel +10 mark): < 96dB
• Input & Output Microphone Input: 2.4k
• Impedances Line Input: 11k
• Stereo Input: 100k
• Outputs: 75
• Input & Output Mic/Line input Maximum Level: +17dBu
• Levels Line input Maximum Level: +30dBu
• Stereo Input Maximum Level: +30dBu
• Mix Output Maximum level: +20dBu
• Headphones (at 200): 300mW
• EQ (Mono Input):
  • HF: 12kHz, ±15dB, shelving
  • Mid: 50Hz - 3.5kHz
  • LF: 60Hz
• Metering: 12-segment LED bargraphs for Mix L&R outputs
• AC mains supply: 85V-270V AC, 50/60Hz universal input
• Power consumption: Less than 20W
• Dimensions: 80mm(11”)W, 90.5mm(3.56”)H, 362mm(14.25”)D